How to remove drawer slides
Removing drawer slides is a common need during routine home repairs or remodels. Whether you're replacing a damaged slide or thoroughly cleaning the inside of a drawer, it's crucial to know the correct disassembly method. The following will introduce the steps to disassemble the drawer slides in detail, and attach hot topic data in the past 10 days for reference.
1. Drawer slide disassembly steps
1.Preparation: Empty the items in the drawer and make sure the drawer is fully open.
2.Positioning slide type: Common slide rail types include side-mounted, bottom-mounted and ball-mounted. Different types of slide rails have slightly different methods of disassembly.
3.Removing side-mounted slide rails: Find the buckle or screw on the inside of the slide rail, use a screwdriver to loosen or press the buckle, and gently lift the drawer up to separate it.
4.Removing the bottom-mounted slide rail: Usually you need to disassemble the drawer bottom plate first, and then loosen the screws fixing the slide rail.
5.Removing the ball slide: Locate the release button (usually a black plastic piece) at the end of the slide rail and press it to slide the drawer out.
2. Hot topic data on the entire network in the past 10 days
| Ranking | topic | heat index | Main platform |
|---|---|---|---|
| 1 | AI painting copyright dispute | 9,850,000 | Weibo/Zhihu |
| 2 | New energy vehicle price cuts | 8,720,000 | Douyin/Autohome |
| 3 | World Cup fan clashes | 7,530,000 | Tencent Sports/Hupu |
| 4 | Controversy over the introduction of prepared meals to campus | 6,910,000 | Little Red Book/Parent Group |
| 5 | Huawei new phone released | 6,450,000 | Station B/Technology Forum |
3. Precautions for disassembly
1.Safety first: Pay attention to protect your fingers during disassembly to avoid being scratched by the metal edges.
2.Parts storage: Keep the disassembled screws and small parts properly. It is recommended to use small containers for classified storage.
3.Slide rail cleaning: After disassembly, the slide rail can be thoroughly cleaned to remove accumulated dust and oil.
4.Lubrication and maintenance: Special lubricant can be applied to the slide rail before reinstallation to ensure smooth sliding.
4. Frequently Asked Questions
Q: What should I do if the drawer cannot be put back after disassembly?
A: Check whether the slide rails are aligned and make sure the slide rails on both sides are on the same level. You can refer to the original installation hole position for adjustment.
Q: How can I dismantle the slide rail if it is stuck and cannot be pulled?
A: You can use lubricant such as WD-40 to spray on the stuck area, wait for 10 minutes and then try to shake the drawer slightly to loosen it.
5. Tool recommendation
| Tool name | Purpose | Recommended brands |
|---|---|---|
| Phillips screwdriver | Remove the fixing screws | Wera/Stanley |
| Flat head screwdriver | Pry the plastic buckle | Hazet |
| Slide rail lubricant | Maintenance | WD-40 special model |
Through the above detailed disassembly guide and precautions, I believe you can successfully complete the disassembly of the drawer slides. For more home repair tips, you can follow relevant discussions in recent hot topics.
check the details
check the details
en
